Palmer Asphalt Company
Home
Products
MSDS
Contacts
Request Information
What's New
In the News
Archives
Photo Gallery
Export
Links
Contractor Offers
Where to Buy BULLDOG
Technical Notes
Green Info




#601AF BULLDOG® MASTIC DAMPPROOFING CEMENT
Bulldog Heavy Duty Flashing Cement A heavy trowel consistency solvent type mastic designed for sag resistant application to vertical masonry surfaces.

AVAILABLE ONLY IN NON-ASBESTOS FORMULATION.

Meets ASTM D4586
  Data SheetMSDS

#602AF BULLDOG® SEMI-MASTIC DAMPPROOFING
Bulldog Heavy Duty Flashing Cement A heavy brush grade solvent type coating containing asphalt, solvent and mineral fillers and/or other stabilizers.  No heating or thinning of material is required.

AVAILABLE ONLY IN NON ASBESTOS FORMULATION.

Meets ASTM D4479
  Data SheetMSDS

#603 BULLDOG® NON-FIBERED DAMPPROOFING
Bulldog Heavy Duty Flashing Cement An easily applied liquid coating made with select asphalts and petroleum solvents.
  Data SheetMSDS

#41AF BULLDOG® SEMI-MASTIC EMULSION DAMPPROOFING
Bulldog Heavy Duty Flashing Cement A heavy brush or spray grade coating combining special asphalts mixed with water and fillers for easy application to dry or slightly damp surfaces.

Meets ASTM D 1227, Type IV and ASTM D 1187 Type I

Contains no asbestos.
  Data SheetMSDS

#42 BULLDOG® NON-FIBERED EMULSION DAMPPROOFING
Bulldog Heavy Duty Flashing Cement A brush or spray grade asphaltic coating emulsified with water and agents. 

Meets ASTM D 1227, Type III.
  Data SheetMSDS

#43AF BULLDOG® MASTIC EMULSION DAMPPROOFING
Bulldog Heavy Duty Flashing Cement An asbestos-free trowel grade mastic made with asphalt, water and reinforcing fillers and fibers.  It has a smooth paste like consistency that spreads easily and provides an even, quick drying film.
  Data SheetMSDS

#44AF BULLDOG® BITUSTATIC COMPOUND
Bulldog Heavy Duty Flashing Cement BULLDOG Bitustatic Compound is composed of high grade asphalt, petroleum solvent blended in with select mineral fillers and other ingredients.  It forms a tough film for protection against the elements and will dry to touch in a few hours with a full cure in approximately 24 hours.  After the material cures it may be coated with BULLDOG Non-Fibered Aluminum Coating to obtain a bright heat reflective finish.
  Data SheetMSDS

#45 BULLDOG® FOUNDATION COATING
Bulldog Heavy Duty Flashing Cement A heavy brush consistency of non-fibered petroleum base asphalt that requires no heating or thinning before use. Provides excellent dampproofing and waterproofing protection. Not intended to withstand high hydrostatic pressure.
  Data SheetMSDS

 



Palmer Asphalt Co. - 196 West 5th Street - Bayonne, NJ 07002
Phone: 1-800-352-9898 - Fax: 1-201-339-8320
info@palmerasphalt.com